Dro Scale Installation

There are a number of posts on different PM lathe DRO installs, Darkzero did one specific to the PM1236 A few of many addition postings on 1340GT DRO installs that should be very similar and with lots of ideas. Dod Discharge Review Program Special Spd Kcrg there. Depending on the DRO provided, the brackets may or may not work, and usually you end up machining your own. Comes out a lot nicer that way. The longitudinal axis is usually mounted on a adjustable aluminum beam with four set screws in the corners to adjust the beam and you also want to do slots for the mounting bolts (if none are on the scale) at either end to allow ventricle adjustment. Magnetic scales are often mounted different than glass scales, a bit more forgiving with the alignment. You need to sweep the beam and scale to make sure it is parallel in all planes.

DRO Pros also has an extensive library of installs and information. Black Body Radiation Experiment Pdf Files. They also have lots of videos.

Voltage range: AC 80V-260V/50HZ-60HZ Power dissipation: 20VA Axis: 2 Display: 7 bit display with sign Times frequency: 4X Readout box input signal: TTL, ELA-422-A Input frequency: >100KHZ Resolution: 10µm, 5µm, 1µm, 0.5µm, 0.1µm Operating keyboard: Light touch buttons Scale grating space: 0.04mm, 0.02mm, 0.01mm Grating scale: 20µm Scale grating system: Infrared optical measuring system Infrared wavelength: 880nm Readhead transport: Five precision bearing Power supply: +5V Digital Readout start only $358 complete! DROKITS.com 1285 Stratford Ave Suite G #213 Dixon, CA 95620.

Project: Installing DROs on DRO PROS. DRO PROS DRO Installation. And the optimum length to which to cut the scale. DRO PROS provides excellent documentation.